Complete Speed Bump with Solar LEDs

Solar LED Speed Bump – 2.5 m or 5 m – 50 or 70 mm – Up to 40 Tons

The modular speed bump with integrated solar LEDs is designed to slow vehicles effectively in poorly lit or high-risk areas without requiring electrical wiring or complex installations. Available in 2.5 m or 5 m lengths, it combines physical speed reduction with active visual signaling, ensuring drivers immediately see and understand the hazard.

It is particularly suitable for industrial sites, parking areas, private roads, and poorly illuminated zones.

Dual action: speed reduction and visual alert

This speed bump works on two levels:

• Mechanical slowing, thanks to its 50 mm or 70 mm height, which forces vehicles to reduce speed.

• Visual alert, using flashing solar LEDs that draw attention from a distance.

With two flashing LEDs per meter, the system creates a continuous warning signal that highlights the hazard area before drivers even recognize the shape of the bump.

This provides active visibility without electrical power, making it ideal for remote or poorly lit sites.

Modular design to match roadway width

The system is made up of expandable modules, allowing a total length of:

• 2.5 m

• 5 m

This modular structure lets you adapt the installation precisely to the usable width of your roadway, and individual modules can be replaced independently if needed.

Enhanced visibility day and night

Each module integrates:

• 4 reflectors for passive visibility from vehicle headlights

• Flashing solar LEDs for continuous active visibility

This combination ensures the speed bump remains clearly visible in all conditions, including rain, fog, or dark industrial environments.

Designed for heavy traffic

With a load capacity of up to 40 tons, this speed bump can withstand trucks, construction equipment, and industrial vehicles.

The ultra-resistant rubber construction absorbs compression, repeated impacts, and temperature variations without premature degradation.

Integrated cable channel for technical areas

The Ø27 mm cable channel allows cables, hoses, or conduits to pass safely beneath the speed bump without being exposed to crushing.

This is particularly useful on construction sites, temporary platforms, or evolving technical installations.

End caps and fixings included for a clean installation

• Rounded end caps included to eliminate sharp edges and improve vehicle passage comfort

• Fixings included for installation on asphalt or concrete

This allows immediate installation without additional accessories.

Technical specifications

Total length: 2.5 m or 5 m (expandable modules)

Width: 430 mm

Height: 50 mm or 70 mm

Material: Ultra-resistant rubber

Load capacity: Up to 40 tons

Reflectors: 4 per module

LEDs: 2 flashing solar LEDs per meter

Cable channel: 1 integrated Ø27 mm channel

End caps: Rounded, included

Fixings: Included (for asphalt or concrete)

FAQ – Solar LED speed bump

Do the LEDs work without direct sunlight?

Yes. They recharge during daylight and operate autonomously at night.

Is it compatible with heavy trucks?

Yes. Its 40-ton load capacity allows use with trucks and heavy equipment.

Are the LEDs replaceable?

They are integrated into the modules for mechanical protection. If needed, the corresponding module can be replaced.

Can it be installed on very wide roads?

Yes. The modular system allows additional modules to extend the total length if required.

Can it be used outdoors year-round?

Yes. It is designed to withstand weather conditions and temperature variations.