Heavy-Duty Truck Traffic Speed Bump Kit

Heavy-Duty Speed Bump for Trucks – 2.5 m or 5 m – 70 mm Height – Up to 50 Tons

The heavy-duty truck speed bump made from high-strength vulcanized rubber is designed to effectively slow down heavy vehicles in areas where standard speed bumps quickly become ineffective, deform, or wear out. With a 70 mm height, it forces a clear reduction in speed even for loaded trucks, rigid vehicles, and industrial machinery, while remaining durable under intensive traffic.

It is available in total lengths of 2.5 m or 5 m, allowing it to adapt to most industrial roadway widths.

70 mm height designed for heavy vehicle loads

The 70 mm height creates a noticeable constraint even with high axle loads. Drivers must anticipate the bump, reduce speed, and stabilize their trajectory.

This geometry ensures real speed reduction for heavy vehicles, where lower bumps often have little effect.

Modular system for precise lane coverage

The speed bump is composed of 500 mm modules, allowing the configuration of:

• 2.5 m total length (5 modules)

• 5 m total length (10 modules)

This modular design allows you to adapt the installation to the exact width of your roadway, while also simplifying maintenance. If one module is damaged, it can be replaced individually without removing the entire system.

Material designed to withstand heavy loads

The high-density vulcanized rubber construction is engineered to support up to 50 tons, without crushing, cracking, or losing its shape over time.

It is also UV-resistant, allowing permanent outdoor installation without premature deterioration.

High visibility in all conditions

Each module is equipped with four “cat’s eye” reflectors, which reflect vehicle headlights toward approaching drivers.

This creates a highly visible passive signal, ensuring the speed bump remains noticeable at night, in rain, or in poorly lit areas.

Two integrated cable channels for network protection

Each module includes two Ø40 mm cable channels, allowing cables, hoses, or conduits to pass safely beneath the bump without risk of crushing or damage.

This feature is particularly useful in construction sites, temporary installations, or technical industrial zones.

Easy installation

The fixings are included, enabling quick installation on concrete or asphalt surfaces without the need to purchase additional hardware.

Technical specifications

Total length: 2.5 m or 5 m (500 mm modules)

Width: 500 mm

Height: 70 mm

Material: High-strength vulcanized rubber

Load capacity: Up to 50 tons

UV resistance: Yes

Reflectors: 4 “cat’s eye” reflectors per module

Cable channels: 2 channels Ø40 mm per module

Fixings: Included

FAQ – Heavy-duty truck speed bump

Is it really effective for heavily loaded trucks?

Yes. The 70 mm height combined with a 50-ton load capacity ensures effective speed reduction even for very heavy vehicles.

Can it be used outdoors year-round?

Yes. It is designed to resist UV exposure, weather conditions, and temperature variations.

Is it suitable for industrial machinery?

Yes. It is compatible with construction equipment, forklifts, heavy vehicles, and industrial machinery.

Can it be used for temporary installations?

Yes. Thanks to its modular design and accessible fixings, it can be installed or removed if needed.

Are the cable channels large enough for industrial conduits?

Yes. The Ø40 mm channels allow the passage of most standard industrial hoses and cable conduits.